For a number of years, FreeBSD was not officially supported as a host OS by any of the available virtualization solutions. Some people were using older and mostly obsolete versions of VMware (like emulators/vmware3), which utilized the Linux® binary compatibility layer. Shortly after the release of FreeBSD 7.2, Sun's VirtualBox™ appeared in the Ports Collection as a native FreeBSD program.
VirtualBox is an actively developed, complete virtualization package, that is available for most operating systems including Windows®, Mac OS®, Linux and FreeBSD. It is equally capable at running Windows or UNIX® like guests. It is released as open source software, but with closed-source components available in a separate extension pack. These components include support for USB 2.0 devices, among others. More information may be found on the “Downloads” page of the VirtualBox wiki, at http://www.virtualbox.org/wiki/Downloads. Currently, these extensions are not available for FreeBSD.
VirtualBox is available as a FreeBSD port in emulators/virtualbox-ose. As VirtualBox is very actively developed, make sure your ports tree is up to date before installing. Install using these commands:
# cd /usr/ports/emulators/virtualbox-ose # make install clean
One useful option in the configuration dialog is the GuestAdditions suite of programs. These provide a number of useful features in guest operating systems, like mouse pointer integration (allowing the mouse to be shared between host and guest without the need to press a special keyboard shortcut to switch) and faster video rendering, especially in Windows guests. The guest additions are available in the menu, after the installation of the guest OS is finished.
A few configuration changes are needed before VirtualBox is started for the first time. The port installs a kernel module in /boot/modules which must be loaded into the running kernel:
# kldload vboxdrv
To ensure the module always gets loaded after a reboot, add the following line to /boot/loader.conf:
vboxdrv_load="YES"
To use the kernel modules that allow bridged or host-only networking, add the following to /etc/rc.conf and reboot the computer:
vboxnet_enable="YES"
The vboxusers group is created during installation of VirtualBox. All users that need access to VirtualBox will have to be added as members of this group. The pw command may be used to add new members:
# pw groupmod vboxusers -m yourusername
The default permissions for /dev/vboxnetctl are restrictive and need to be changed for bridged networking.
To test it temporarily:
# chown root:vboxusers /dev/vboxnetctl # chmod 0660 /dev/vboxnetctl
To make the permissions change permanent, add these lines to /etc/devfs.conf:
own vboxnetctl root:vboxusers perm vboxnetctl 0660
To launch VirtualBox, either select the item from the graphic environment's menu, or type the following in a terminal:
% VirtualBox
For more information on configuring and using VirtualBox, please visit the official website at http://www.virtualbox.org. As the FreeBSD port is very recent, it is under heavy development. For the latest information and troubleshooting instructions, please visit the relevant page in the FreeBSD wiki, at http://wiki.FreeBSD.org/VirtualBox.
Note: These steps require VirtualBox 4.0.0 or later.
In order to be able to read and write to USB devices, users need to be members of the operator group:
# pw groupmod operator -m jerry
Then, add the following to /etc/devfs.rules (create it if it does not exist yet):
[system=10] add path 'usb/*' mode 0660 group operator
To load these new rules, add the following to /etc/rc.conf:
devfs_system_ruleset="system"
Then, restart devfs:
# service devfs restart
USB can now be enabled in the guest operating system. USB devices should be visible in the VirtualBox preferences.
Access to the host DVD/CD drives from guests is achieved through the sharing of the physical drives. In GUI this is set up from the Storage window in the Settings of the virtual machine. Create an empty IDE CD/DVD device first. Then choose the Host Drive from the popup menu for the virtual CD/DVD drive selection. A checkbox labeled Passthrough check box will appear. This allows the virtual machine to use the hardware directly. For example, audio CDs or the burner only function if this option is selected.
HAL needs to run for VirtualBox DVD/CD functions to work, so enable it in /etc/rc.conf and start it (if it is not already running):
hald_enable="YES"
# service hald start
In order for users to be able to use VirtualBox DVD/CD functions, they need access to /dev/xpt0, /dev/cdN, and /dev/passN. This is usually achieved by making the user of VirtualBox a member of the operator group, which is also the default group of the above mentioned devices. Permissions of these devices have to be corrected by adding the following lines to /etc/devfs.conf:
perm cd* 0600 perm xpt0 0660 perm pass* 0660
# service devfs restart